![]() |
|
Mapping Discussion - Printable Version +- XOR Userforum (https://forum.xor.eu) +-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3) +--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6) +---- Forum: General Questions (https://forum.xor.eu/forumdisplay.php?fid=17) +---- Thread: Mapping Discussion (/showthread.php?tid=1712) |
RE: Mappings - XORadmin - 12-16-2023 (12-16-2023, 09:24 PM)yrn1 Wrote:(12-16-2023, 09:04 PM)XORadmin Wrote:(12-16-2023, 08:39 PM)yrn1 Wrote: Sorry ‘scale’ is a bit an overloaded term. I want to use a CV input to ‘attenuate’ a value. So I have some mapping stuff going on and at some point I want to use a CV input to attenuate the value of another row.. Something like Ah OK, I see. Yes indeed it is not in the preliminary manual yet. It has been one of the last features that I added. RE: Mappings - zeitkunst - 12-21-2023 (12-10-2023, 08:05 AM)XORadmin Wrote: Right if you use CV in as a value then you would send 4095 clocks/triggers to the track if for example 000/FFF would be the result. I have a strange problem when using this that I'm not sure how to debug. I can successfully get an external gate/trigger clock signal to advance each step of the pattern whenever it the CV goes high. I do this by setting the mapping as described and setting the track clock to "mapping". However, for some reason the CV *outputs* are then all disabled (i.e., they stay at their previous value and don't change), and the advancing does not respect any breaks that I have in the pattern (i.e., I have a break at step 16, but it ignores that and just goes all the way through to step 64 and then returns to step 1 again). So, to summarize: * I can create a pattern that is clocked internally and outputs correct CV and respects the breaks that I put into the pattern. * I can create a mapping like described above to clock each step of the pattern using an external trigger to CV input 1. * Once I change the track clock on this track with this pattern to "mapping", the steps are advanced correctly for each external trigger received, but the CV outputs don't function anymore (they remain at whatever level they were before switching to "mapping") and any breaks in the pattern are ignored. * If I then change the track clock back to "normal" the CV outputs and breaks are respected. Has anyone experienced this and have a solution? Thanks in advance for any suggestions! RE: Mappings - XORadmin - 12-21-2023 (12-21-2023, 03:36 PM)zeitkunst Wrote: .Yes! A few posts earlier ;-) RE: Mappings - zeitkunst - 12-21-2023 (12-21-2023, 04:03 PM)XORadmin Wrote:(12-21-2023, 03:36 PM)zeitkunst Wrote: .Yes! A few posts earlier ;-) Ahh! Yes, might help if I read the entire thread rather than just search results ![]() But I guess I still have a question. I can get the outputs to function if I set the ticks to be 1 (as in post #13), but then I have the issue that my track of course needs 6 triggers to advance each step I've tried to use a CBPB 101 0E FX command at step 00 to set the track clock to be *6 but that doesn't seem to have any effect. Is there a workaround for this, or do we need to wait for the maintenance release? Or am I missing something really simple to solve this issue?
RE: Mappings - XORadmin - 12-22-2023 (12-21-2023, 04:29 PM)zeitkunst Wrote:(12-21-2023, 04:03 PM)XORadmin Wrote:(12-21-2023, 03:36 PM)zeitkunst Wrote: .Yes! A few posts earlier ;-) They are less elegant workarounds. One would be to use a one shot table which got 6 times the xmap command. (Int clock 1). Another would be to create a mapping that would allow a few skipped lines to play once which each would give a tick. Or wait for the maintenance release. RE: Mappings - zeitkunst - 12-22-2023 (12-22-2023, 07:00 AM)XORadmin Wrote:(12-21-2023, 04:29 PM)zeitkunst Wrote:(12-21-2023, 04:03 PM)XORadmin Wrote:(12-21-2023, 03:36 PM)zeitkunst Wrote: .Yes! A few posts earlier ;-) Okay, thanks for the suggestions, I'll give them a try. It also looks like even with the CALC workaround (from earlier in the thread), the CV outputs remain in a single octave. RE: Mappings - TheSandbag - 12-22-2023 I'm trying to map a main trigger to fire the cv16 envelopes but it doesn't seem to happen, I have "TRIG TR 1 > CV16 EV1X 1- 5" in a mapping row but there seems to be no voltage change on cv16 output 5. In fact it doesn't seem anything will trigger the env to fire RE: Mappings - XORadmin - 12-22-2023 (12-22-2023, 11:50 AM)TheSandbag Wrote: I'm trying to map a main trigger to fire the cv16 envelopes but it doesn't seem to happen, I have The EV1X (GATE) or EV1O (Trigger) commands do fire the envelope. For a trigger you better use the O command. Your envelopes are most probably not set up yet (no CV16 track assigned) and then the main settings are not initialized. So assign a track to CV16 and it will work. I will add the initialization in the maintenance update. RE: Mappings - kriskeyman - 12-22-2023 It appears Trig/CV expanders cannot be selected as source in Mappings? I was hoping to map gate on/off sequenced in Trig16 track to mute/unmute a different track. This works fine with Trig out 1-6, but not available from expanders? RE: Mappings - XORadmin - 12-22-2023 (12-22-2023, 06:55 PM)kriskeyman Wrote: It appears Trig/CV expanders cannot be selected as source in Mappings? I was hoping to map gate on/off sequenced in Trig16 track to mute/unmute a different track. This works fine with Trig out 1-6, but not available from expanders? No, because the expanders are generating the values themselves and there is no feedback to the NerdSEQ. To directly answer that question: monitoring 16x4 possible additional values at a usable speed is technically not possible. |