+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: Firmware / Manual (https://forum.xor.eu/forumdisplay.php?fid=11)
+---- Thread: Release Candidate Firmware V1.18 (RC3 UPDATE) (/showthread.php?tid=285)
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - Barney Rubble - 02-06-2019
(02-06-2019, 08:43 PM)XORadmin Wrote:(02-06-2019, 08:39 PM)Barney Rubble Wrote: RC2 Some observations -:
1 Loading update the screen said something like SD Card was empty ? blah blah - but process continued and update was successful
2 Loaded project from RC1 and project loaded at 1bpm should have been 120bpm
Otherwise seems to be ok at the mo
cheers
b
1 - When only powering on the NerdSEQ, it can be that the SD card needs more time to start up. Just hold the buttons until it works well after a retry. That has nothing to do with RC2
2 - Are you sure? There is no difference in that from RC1. So if you saved in RC1 or older versions with 120 bpm, it should load with RC2 on 120 bpm. Or did you have external sync?
1. Accepted it was possibly the SD card not seated properly - in any case RC2 works :-)
2. I just followed exact same start up sequence and the same RC1 project loads at 120bpm - I'm going to assume this SD card related nonsense.
Completely unrelated - Today I got a camcorder that has had intermittent failures for over a year working. I changed the SD Card so lets blame it on the SD Card - Happy Nerding peeps :-)
Cheers
b
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-07-2019
(02-06-2019, 10:09 PM)Barney Rubble Wrote:(02-06-2019, 08:43 PM)XORadmin Wrote:(02-06-2019, 08:39 PM)Barney Rubble Wrote: RC2 Some observations -:
1 Loading update the screen said something like SD Card was empty ? blah blah - but process continued and update was successful
2 Loaded project from RC1 and project loaded at 1bpm should have been 120bpm
Otherwise seems to be ok at the mo
cheers
b
1 - When only powering on the NerdSEQ, it can be that the SD card needs more time to start up. Just hold the buttons until it works well after a retry. That has nothing to do with RC2
2 - Are you sure? There is no difference in that from RC1. So if you saved in RC1 or older versions with 120 bpm, it should load with RC2 on 120 bpm. Or did you have external sync?
1. Accepted it was possibly the SD card not seated properly - in any case RC2 works :-)
2. I just followed exact same start up sequence and the same RC1 project loads at 120bpm - I'm going to assume this SD card related nonsense.
Completely unrelated - Today I got a camcorder that has had intermittent failures for over a year working. I changed the SD Card so lets blame it on the SD Card - Happy Nerding peeps :-)
Cheers
b
Hmm...yes, i don't know why the BPM change happened. Only thing that comes in my mind is if you used some external clock. Once the NerdSEQ started up, there should be no issues with the SD card anymore. So keep us updated if it fails again.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - mpiecora - 02-07-2019
RC2 IS AWESOME!!!!!!!!!!!!
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - gromler - 02-07-2019
Hey Guys,
When I changed my Clock In to Mod. Slave, the GUI started acting weird. This is in RC1 as I have not yet put RC2 in the machine.
Here is a video:
https://photos.app.goo.gl/ScVewhs7caXTURj49
--Scott
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-07-2019
(02-07-2019, 01:44 PM)gromler Wrote: Hey Guys,
When I changed my Clock In to Mod. Slave, the GUI started acting weird. This is in RC1 as I have not yet put RC2 in the machine.
Here is a video:
https://photos.app.goo.gl/ScVewhs7caXTURj49
--Scott
Oh yes, it is a graphical glitch when scrolling in the project screen. Because of the new options i counted the index wrong. Will be fixed in RC3. Thanks.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - gromler - 02-07-2019
(02-07-2019, 02:58 PM)XORadmin Wrote:(02-07-2019, 01:44 PM)gromler Wrote: Hey Guys,
When I changed my Clock In to Mod. Slave, the GUI started acting weird. This is in RC1 as I have not yet put RC2 in the machine.
Here is a video:
https://photos.app.goo.gl/ScVewhs7caXTURj49
--Scott
Oh yes, it is a graphical glitch when scrolling in the project screen. Because of the new options i counted the index wrong. Will be fixed in RC3. Thanks.
All good!! Thank you so much for the continued work on this. This tool gets more and more valuable to my rig every day.
--Scott
One other thing that I noticed, and this could be me not understanding how it works, is that if I am using an external clock and reset, the reset does not get passed though to the reset output of the NerdSeq.
--Scott
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - skybox - 02-07-2019
I also started seeing the 1bpm on my songs when loading as of RC2.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-07-2019
(02-07-2019, 04:59 PM)gromler Wrote:(02-07-2019, 02:58 PM)XORadmin Wrote:(02-07-2019, 01:44 PM)gromler Wrote: Hey Guys,
When I changed my Clock In to Mod. Slave, the GUI started acting weird. This is in RC1 as I have not yet put RC2 in the machine.
Here is a video:
https://photos.app.goo.gl/ScVewhs7caXTURj49
--Scott
Oh yes, it is a graphical glitch when scrolling in the project screen. Because of the new options i counted the index wrong. Will be fixed in RC3. Thanks.
All good!! Thank you so much for the continued work on this. This tool gets more and more valuable to my rig every day.
--Scott
One other thing that I noticed, and this could be me not understanding how it works, is that if I am using an external clock and reset, the reset does not get passed though to the reset output of the NerdSeq.
--Scott
Yes thats correct and intended to be like this. The reset and clock signals are not thru routed but you have input and output seperation. So clock outputs are generated from the NerdSEQ as well as the reset pulses which pulses either on sequencer stop or controllable from the sequencer.
Just split your reset signal if you need to pass it through.
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - XORadmin - 02-07-2019
(02-07-2019, 06:08 PM)skybox Wrote: I also started seeing the 1bpm on my songs when loading as of RC2.
OK, do you have a reproducable project file. What are the clock settings? And are these older 1.17 projects that you load in with 1.18?
RE: Release Candidate Firmware V1.18 (RC2 UPDATE) - skybox - 02-07-2019
It seems very "sometimes, but at least once per session" kind of thing. I'm going to try and get a consistent reproduction today and get you the steps and file to have you do it yourself.