+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: General Questions (https://forum.xor.eu/forumdisplay.php?fid=17)
+---- Thread: Hertz/Volt (/showthread.php?tid=1343)
Hertz/Volt - MidiSlave - 03-09-2022
Hi nerds,
I'm wondering if there is something up with the hertz/volt setting or i'm missing something or maybe both..
I'm trying to sequence/play a Behringer K2 with the Nerdseq using CV/gate and I believe it receives Hertz/volt but i'm not having much success there. When I play the K2 directly via my keystep pro (set to Hertz/volt) the K2 pitch/octave range behaves as expected.
any ideas?
Thanks
Nathan
RE: Hertz/Volt - XORadmin - 03-09-2022
(03-09-2022, 11:30 AM)MidiSlave Wrote: Hi nerds,
I'm wondering if there is something up with the hertz/volt setting or i'm missing something or maybe both..
I'm trying to sequence/play a Behringer K2 with the Nerdseq using CV/gate and I believe it receives Hertz/volt but i'm not having much success there. When I play the K2 directly via my keystep pro (set to Hertz/volt) the K2 pitch/octave range behaves as expected.
any ideas?
Thanks
Nathan
Hey Nathan,
what is your issue exactly. I just tested it and it produces the correct voltages when set to Hz/volt:
C-0 = 0,25V
C-1 = 0,5V
C-2 = 1V
C-3 = 2V
C-4 = 4V
C-5 = 8V
Offset switch to the right of course.
RE: Hertz/Volt - MidiSlave - 03-09-2022
(03-09-2022, 11:51 AM)XORadmin Wrote:(03-09-2022, 11:30 AM)MidiSlave Wrote: Hi nerds,
I'm wondering if there is something up with the hertz/volt setting or i'm missing something or maybe both..
I'm trying to sequence/play a Behringer K2 with the Nerdseq using CV/gate and I believe it receives Hertz/volt but i'm not having much success there. When I play the K2 directly via my keystep pro (set to Hertz/volt) the K2 pitch/octave range behaves as expected.
any ideas?
Thanks
Nathan
Hey Nathan,
what is your issue exactly. I just tested it and it produces the correct voltages when set to Hz/volt:
C-0 = 0,25V
C-1 = 0,5V
C-2 = 1V
C-3 = 2V
C-4 = 4V
C-5 = 8V
Offset switch to the right of course.
Of course. The offset switch.
Thanks for your patience and for responding so quickly.
You’re a legend.
RE: Hertz/Volt - XORadmin - 03-09-2022
Ah haha....I was a bit worried as I don't have any gear to really test it but only could implement it theoretically and let it be tested by users.
Nice that it works!