+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: General Questions (https://forum.xor.eu/forumdisplay.php?fid=17)
+---- Thread: Change Track Clock (/showthread.php?tid=1546)
Change Track Clock - tinytuches - 03-05-2023
hello,
I encounter a clock problem per track.
let me explain, when I play a track with a division by 4 (which I program with patch) and I want to pass this same track to a division by 2 (still with patch) my clock changes, but with a pattern of delay..
do you have a trick to circumvent the problem?
or maybe it's me who's doing it wrong
THANKS
RE: Change Track Clock - XORadmin - 03-05-2023
(03-05-2023, 03:24 PM)tinytuches Wrote: hello,
I encounter a clock problem per track.
let me explain, when I play a track with a division by 4 (which I program with patch) and I want to pass this same track to a division by 2 (still with patch) my clock changes, but with a pattern of delay..
do you have a trick to circumvent the problem?
or maybe it's me who's doing it wrong
THANKS
Do you mean that the change of the clock starts with the next pattern?
RE: Change Track Clock - tinytuches - 03-05-2023
No exactly, let's imagine that my pattern 01 plays with a clock divided by 2, my pattern 02 is divided by 4
If I go from pattern 01 to pattern 02, pattern 02 will keep the previous clock (division by 2) throughout its length, and then will change (division by 4)
basically the clock change information always has a delay pattern
RE: Change Track Clock - XORadmin - 03-05-2023
Yes but that is the correct functionality. Clock changes are queued to allow a synchronized change.
You need to use the clock change command in direct mode for it to be changed immediately. ( Possibly needed from an FX but I don't know exactly out of my head rght now)
-> From the manual:
CBPB → Combined Playback FX
This is a multifunction FX to change the clock settings, playback order,
transpositions and to execute live jumps between patterns.
The first digit defines the functions:
0XX Change the clock type after the end of the current playing pattern. The new
pattern will play with the new clock setting.
Here you can set the different dividers and multipliers for the current track. Possible
settings are from 000 to 010:
/7, /6, /5, /3, /32, /16, /8, /4, /2, Normal clock, *2, *4, *8, *3, *5, *6, *7
This order is chosen on purpose as mostly base2 dividers and multipliers are used
around the regular clock. (See track setup)
The first digit got an additional function to either let the new clock change with a new
pattern (after the end of the current playing pattern) or to force to the new clock
setting directly.
1XX Same as 0XX but it changes the clock immediately. Use this with caution as
this might cause a un-synchronized pattern if being called somewhere in the middle
of a pattern.
If it’s being called from the first step, the new clock setting will run properly
synchronized within this pattern. (Depending on if the last pattern was synchronized)
RE: Change Track Clock - tinytuches - 03-05-2023
I will try this step! Thanks a lot!