• added: support for the new Dualchord expander. New tracktype, Mapping destinations, automator destinations, Poly Midi Support etc.... (Pages 65,115,197)
  

• added: mapping sources: Track Sequencer Row, Local Buttons, Last played notes for all columns (page 156+)
  
• added: mapping destinations: Dualchord functions, Edit steps, set sequencer row/cursor,  enable scroll Mode, Euclidean startpoint/offset, Livemode (CV Input), SKIP Rows, envelopes, automators and tracks can be defined dynamically by a variable/row (page 164+)
  
• updated: XMAP FX (from pattern/patch) command with added conditions (check or execute Mapping ROW and play/skip the current pattern row if the result is 0 or not) (page 38)
  
• added: indicator which shows the live results of possible skipped / disabled mapping rows (page 145)
  
• fixed: CV16 from mapping note output didn’t work well for NSA channel 2
  
• fixed: Pitch2Note so a note will snap in within the note range +- half semitone
  
• added: indicator to separate mapping double values (as in CALC and SKIP)  (page 158)
  
• updated: replaced mapping constant '=9' with a standard threshold value (set in Nerdmenu, saved with project) (page 131)
  
• added: new Execute Multiple Rows in mapping. One that does execute exclusive (XXMP) and disables the rows for everything else and another that gets only executes (XLOD) once after the project loads (page 164)
  
• added: mapping setting (in Nerd Menu) to choose if the mappings should be automatically stopped if editing any destinations (page 131)
  
• updated: Track Euclidean and Note step functions so they work also when not on their tracks/screens
  
• updated: glide and glide resolution for mapping to the full range
  
• added: sharp & flat noteview for mappings (page 128)
  

• added: Launchpad for I2C/Multi Drummatrix with all functions as the T16 drummatrix (page 201)
  
• updated: switch between launchpad drummatrix columns 1-8 / 9-16 (toggle right pad) (page 204)
  
• updated: Launchpad, if select a step/trigger, then show always the 16 steps of a ‘page’ if possible
  
• updated: Lauchpad Pro MK3 so it also initializes automatically
  

• added: I2C/Multi Drummatrix Destination: Midi Trigger which does generate a Midi Note On+Off (page 113)
  
• added: I2C/Multi Drummatrix Mute (page 14)
  
• added: simple copy/paste for I2C/Multi column and Matrix in the Track Setup Screen (page 114)
  
• added: more ER301 I2C commands: SC.CV+GATE and SC.CV+Trigger without slew (page 109)
  
• updated: probability for I2C/Multi tracks. Is now Columns 123, 456, Matrix1, Matrix2, Matrix3, FX1,2,3, Row (page 71)
  
• updated: replaced CV,MOD and CVGATE/MODGATE I2C/Multi track destinations with a combined set with subgroups. Added CV/MOD + Trigger (page 112)
  
• added: ART support as I2C/Multi column destination (needs additional upcoming expander) (page 111)
  

• added: slide functions to Midi (in velocity column defined and random slide velocities) (page 49)
  
• changed: SHIFT+OK on velocity column changes now between multiple 'types'
  

• updated: Volume for sample playing is moved to execute after the FX
  
• added: random range to sample selected sample column (page 42)
  
• fixed: If BACK FX is using the backwards flag then silence (and probably the other FX) should be ignored. (0100 is now silent and 0200 is unsilent)
  

• added flat/sharp note names. Can be applied per track, mapping & scaling. Per project. (page 128)
  
• fixed: Clone Pattern order would only work in the first 16 sequencer rows
  
• added 3 more screensavers. Lines, Arrows, Blank (page 97)
  
• added: User Interface Import and Export (page 177)
  
• updated: Row highlight setting will now be saved and loaded with the project
  
• fixed: CV Input as table source (would lack sometimes)
  
• added: pc-keyboard scale screen on SHIFT+F2
  
• fixed: 'whole tone' scale was incorrect
  

• updated: Edit steps, cursor CV editing, Midi editing PC-Keyboard editing for several track types
  
• added: Pattern edit combined change marked parts (notes/triggers/modvalues...) (SHIFT+OK+CURSOR UP/DOWN/LEFT/RIGHT) (page 23)
  
• added: Pattern edit move marked parts up/down (SHIFT+OK+PAGE UP/DOWN) (page 23)
  
• added:SHIFT+OK on the trigger column toggles between values (00, FE, Default Value, -- )
  
• changed: Sequencer screen clone down jumps to new pattern position with cursor (page 18)
  
• changed: Trigger16 prelisten which was SHIFT+OK to prelisten the whole row to SHIFT+DOWN+OK
  

• fixed: Dualchord FX Stereo clone names fixed
  
• added: Dualchord re-initializes knobs on project load (Dualchord firmware V1.2)
  
• fixed: Fixed direct sequencer jump FX (and mapping)
  
• fixed: Empty Dualchord note decrement
  
• fixed: Midi velocity from variables
  
• added: compact patch
  
• dualchord initialization and note offset fix
  

(12-20-2024, 03:32 PM)Inkog Wrote: Any word on the 2.02 changelog & manual?