![]() |
|
Combining Multi-IO and 2hp Midi expander - Printable Version +- XOR Userforum (https://forum.xor.eu) +-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3) +--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6) +---- Forum: General Questions (https://forum.xor.eu/forumdisplay.php?fid=17) +---- Thread: Combining Multi-IO and 2hp Midi expander (/showthread.php?tid=1977) |
Combining Multi-IO and 2hp Midi expander - flel - 08-10-2025 Hi there, I imagine this is a silly question but I cannot find the answer in the manual and been trying to find a solution by menu-diving for more time than I'd like with no success so figured I'd ask here. I have both the multi-io and 2hp midi expander, with the multi-io receiving midi directly from the nerdseq and passing it on via the 12 pin ribbon cable to the 2hp midi expander. If I connect a TRS cable into the multi-io TRS out I am able to send midi notes just fine, but if I move the same cable to the midi expander no signal is sent. Am I missing something in the settings? Do I need to change a setting somewhere to turn the 2hp midi expander "on"? Floris RE: Combining Multi-IO and 2hp Midi expander - recliq - 08-10-2025 You can either use the 2hp midi module OR the Multi-IO not both. RE: Combining Multi-IO and 2hp Midi expander - flel - 08-10-2025 Ah yes thanks for clarifying. I see it now in the manual. Not sure how I missed that. If I want to send MIDI signal to multiple destinations using different MIDI channels, can I then use a simple TRS y-splitter or do I need something like this: https://tubbutec.de/trs-bridge/ RE: Combining Multi-IO and 2hp Midi expander - recliq - 08-10-2025 Simple splitter might work but not recommended. The tubutec trs bridge might be a bit over the top but wil def. work. A simple midi thru for trs will do the job, eg. https://www.tindie.com/products/deftaudio/eurorack-midi-trs-thru-1in-4out-midithru/ or any other midi thru box with trs to din cable... RE: Combining Multi-IO and 2hp Midi expander - Tamanoir - 08-11-2025 Hi, You can also use this type of small enclosure if you don't want to consume any speakers in your rack. https://www.thomann.fr/kenton_midi_thru_5.htm |