+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: Firmware / Manual (https://forum.xor.eu/forumdisplay.php?fid=11)
+---- Thread: Firmware V1.04 (/showthread.php?tid=20)
Firmware V1.04 - XORadmin - 10-13-2017
- Fixed an issue where loading a project with a big sample in it could cause problems. Project and Sample loading is improved.
- Added Page Up/Down functionality in the file browser
RE: Firmware V1.04 - psykon - 10-15-2017
Some issues I have with 1.04:
Maybe I just did some things wrong. I'm still learning my way around the nerdseq
- Sample browser shows just one page of samples (7 samples). Scrolling does not work - neither with cursor keys or page-up/down. But using one of those 7 samples works fine.
- Selecting submenues and menue-entries seems inconsistent. Some I can select with the OK button. Some through the cursor-right button. At least one menu is activated with the OK button, while the Manual says cursor-right activates it. Sadly i did not note which entries behaved which way (don't have the modular at home). I can do a proper bugreport later if that would be helpfull.
- The firmware upgrade went really smooth. But only after I tried it with a powercicle. I first tried it a few times with soft-reset, but could not press the button combination for the bootloader fast enough. Having the button combination allready pressed while powering on did the trick.
Other than that, everything I tried worked great
RE: Firmware V1.04 - XORadmin - 10-15-2017
Hey, thanks for the report.
- I will check the sample browser again, but as far as i know it should work well. I added only beside the regular cursor up/down scrolling that it will also do pageup/page down with the up/down buttons
- Oh i got to check the button consistency for menus and submenus. In earlier versions i didn't have the OK button yet, so using the right button was to enter a sub-menu. I am sure forget one or another. Will fix that.
- ha yes...what i always do is also pressing the buttons already and then press right for the reset. (will change that to the OK button ;-) )
RE: Firmware V1.04 - Mooko - 10-15-2017
For me page up page down in the sample browser work fine
RE: Firmware V1.04 - psykon - 10-16-2017
Hm, I'll check the sample browser again and will try a different microsd card if the problem persists.