+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: Nerdseq issue / bugreport (https://forum.xor.eu/forumdisplay.php?fid=8)
+----- Forum: Beauty and less important bugs/glitches (https://forum.xor.eu/forumdisplay.php?fid=16)
+----- Thread: * NO BUG* All Sounds Off Behavior for CV Expander 05 (/showthread.php?tid=747)
* NO BUG* All Sounds Off Behavior for CV Expander 05 - skybox - 05-25-2020
A curious behavior I found exclusively with the 05 out is that after I pressed Shift + Stop x2 to stop all sounds, instead of dropping to 0v, Out #05 outputs to ~4v. I caught this when using 05 for an envelope and Shift + Stop x2 would open the VCA.
I tested this on all other outs, and they all behave as expected.
RE: All Sounds Off Behavior for CV Expander 05 - XORadmin - 05-26-2020
Just to check. If it is set to pure and there was a note or pitch before, then it would go back to the old note/pitch.
RE: All Sounds Off Behavior for CV Expander 05 - skybox - 05-27-2020
That was it! I had accidentally inserted a high note value, deleted it, and then replaced it with an envelope. On stop all sounds, it returns to the value of the deleted note.
For anyone else who might have this issue and wants to know how to resolve it quickly, I just inserted a 000 value into the column, press play and then stop after it passes thru it.
RE: All Sounds Off Behavior for CV Expander 05 - XORadmin - 05-27-2020
Allright, yes with the extra stop you stop/decouple the envelopes indeed.
You could, to avoid these surprises, just use the Add function instead of pure but be sure to set the normal note/pich value to zero (if wanted), so there is no offset with the envelope. Then a stop will just leave it as it is.
RE: All Sounds Off Behavior for CV Expander 05 - skybox - 05-27-2020
I will try that out. Thanks for the tip
