+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: Firmware / Manual (https://forum.xor.eu/forumdisplay.php?fid=11)
+---- Thread: Firmware V1.11 (/showthread.php?tid=81)
Pages:
1
2
Firmware V1.11 - XORadmin - 01-03-2018
A new years release with some minor changings and fixes:
- Changed Delete with moving up and marked delete with moving up. Uses the UP button now instead of the DOWN button. ( SHIFT+UP+DELETE)
- When navigating through the FX types in the pattern screen, the Pitch, FX and tempo settings are getting default values instead of 00. Here tempo gets the current tempo setting automatically
- Fixed that when a JUMP (via break) is active, that another (not quantized) pattern that is selected to play next will now play as expected
- Break got a new function. Now if a value in the break function is filled in, then it repeats the pattern X times (value)
So for break they are these possibilities:
BRK 000 -> Breaks the pattern after the current position
BRK 105 -> Player jumps to pattern row 5
BRK 002 -> Player repeates the pattern 2 times (plays it 3 times) (to break position)
As the sample tracks got 2 tracks inside and if the repeat and Jump commands are used on the same row, then the Jump got a higher priority
Also here, if a new pattern is selected to be played next, the repeat function is being canceled and the BRK works like a BRK 000
Updated manual here:
http://xor-electronics.com/nerdseq_manual_0_9_7/
Happy new year!
RE: Firmware V1.11 - LowOveR - 01-03-2018
the "brk-repeat" function is pretty sweet....thx for the update
RE: Firmware V1.11 - XORadmin - 01-03-2018
(01-03-2018, 08:22 PM)LowOveR Wrote: the "brk-repeat" function is pretty sweet....thx for the update
EDIT : is this the right hex file in your attachement ?
it say´s version 1.10 and the break command don´t work as expected...
Did you updated properly?
Check the manual for the steps you got to follow for an update. I think it should be fine.
RE: Firmware V1.11 - LowOveR - 01-03-2018
yeah...
the error was sitting in front of the machine...works fine
RE: Firmware V1.11 - Liquidyzer - 01-04-2018
Great work with extra brk functions. Will help some with song creation
RE: Firmware V1.11 - Trooper - 01-04-2018
Not at my Nerdseq, when i now set brk, the digit after it (000) is no longer editable ?
If i take something other it is functioning.
Perhaps cause it is a track i did before V1.11 ?
PS: no, even if i do a complete new track, it is no longer editable
RE: Firmware V1.11 - XORadmin - 01-04-2018
(01-04-2018, 05:52 PM)Trooper Wrote: Not at my Nerdseq, when i now set brk, the digit after it (000) is no longer editable ?
If i take something other it is functioning.
Perhaps cause it is a track i did before V1.11 ?
PS: no, even if i do a complete new track, it is no longer editable
Are you sure you are running 1.11 ?
It should work, the maximum value for break is 1FF, so all from 000 to 1FF should be editable.
RE: Firmware V1.11 - ssirkriss - 01-05-2018
nice. Thanks!
RE: Firmware V1.11 - Trooper - 01-05-2018
(01-04-2018, 09:25 PM)XORadmin Wrote: Are you sure you are running 1.11 ?
It should work, the maximum value for break is 1FF, so all from 000 to 1FF should be editable.
did the procedure again, now it works
RE: Firmware V1.11 - standuino - 01-12-2018
for some reason, i can not get into bootloader mode. holding shift, copy and UP, file downloaded in right folder, nothing. did it before without any issue. running 1.07 firmware. i know its me, just need help. thanks.