+- XOR Userforum (https://forum.xor.eu)
+-- Forum: Products (https://forum.xor.eu/forumdisplay.php?fid=3)
+--- Forum: NerdSEQ (https://forum.xor.eu/forumdisplay.php?fid=6)
+---- Forum: NerdSEQ Expanders (https://forum.xor.eu/forumdisplay.php?fid=22)
+---- Thread: CV16 TRIG FX (/showthread.php?tid=905)
CV16 TRIG FX - Kubase - 11-29-2020
Hi,
This has 2 2-digit columns, however only the second is programmable. What do the available values do? I can't find anything in the manual, thanks.
RE: CV16 TRIG FX - XORadmin - 11-29-2020
It's the same as the local TRIG command. Maximum value is FE and the values are the same as for the local triggers.
eg. 20 for a 10ms trigger, 45 -> 20ms trigger 5 repeats , FE = Gate On...
RE: CV16 TRIG FX - Kubase - 11-30-2020
And can I define an output? I assumed it would be the trig output for the track assigned to the CV16 but it doesn’t seem to be working...
RE: CV16 TRIG FX - XORadmin - 11-30-2020
It is for the local output of for the CV16 track. They are other TRG1..6 FX commands for if you want to use another specific output.
Just tested it and it works.
RE: CV16 TRIG FX - Kubase - 11-30-2020
Yep, tested here too, all working thanks. I had the cable plugged in the CV output not the trig.