https://forum.xor.eu/ Mon, 21 Sep 2026 01:07:38 +0000 MyBB https://forum.xor.eu/showthread.php?tid=2110 Fri, 18 Sep 2026 20:21:42 +0200 Static_channel]]> https://forum.xor.eu/showthread.php?tid=2110 Hi everyone!
I’ve had this incredible sequencer for a few weeks now, but there’s just one problem: the groove.
Alternating between 5 and 7 is already more than enough for my taste. I’d like to be able to replicate the 1–10% range available in the Master Swing on individual tracks..
Having swing only on the Master is really too limiting for what I’d like to do
Does anyone know if there’s a way to achieve this?
Thanks a lot!]]> Hi everyone!
I’ve had this incredible sequencer for a few weeks now, but there’s just one problem: the groove.
Alternating between 5 and 7 is already more than enough for my taste. I’d like to be able to replicate the 1–10% range available in the Master Swing on individual tracks..
Having swing only on the Master is really too limiting for what I’d like to do
Does anyone know if there’s a way to achieve this?
Thanks a lot!]]> https://forum.xor.eu/showthread.php?tid=2102 Wed, 01 Jul 2026 21:44:44 +0200 bezoard]]> https://forum.xor.eu/showthread.php?tid=2102
how is it that is can route i2c/multi tracks, which enable drummatrix screen triggers to be used, out of the Midi Out port of the IO gamepad expander?

thank you ]]>
how is it that is can route i2c/multi tracks, which enable drummatrix screen triggers to be used, out of the Midi Out port of the IO gamepad expander?

thank you ]]> https://forum.xor.eu/showthread.php?tid=2097 Wed, 17 Jun 2026 18:13:59 +0200 visti]]> https://forum.xor.eu/showthread.php?tid=2097
I don't know if this is achievable, but I feel like it should be.

Connecting a Linnsturument through the Multi-IO and using the TRS-A Out to a Disting NT would be such a dream compact setup, but I can't get the pitchbends to not bend every note even though they're being transmitted on different channels (?).

I'm not an expert on this, so not sure if my terminology is off a bit.

In the midi setup on the Nerdseq, I have Host Channel 2-9 (Linnstrument 2-9 are the Per Note Channels) all set up to send to the same track.

I can play the Disting polyphonically, but bending any note also bends every other note. I'm not certain if this is because the Nerdseq track itself kinda "smooshes" the forwarded channels together in order to forward the 8 incoming channels to the 4 outgoing.

Anybody have any ideas on how I could set this up?

 I can do an actual midi cable straight from the Linn to the Disting, but then I lose all that Nerdseq goodness.]]>
I don't know if this is achievable, but I feel like it should be.

Connecting a Linnsturument through the Multi-IO and using the TRS-A Out to a Disting NT would be such a dream compact setup, but I can't get the pitchbends to not bend every note even though they're being transmitted on different channels (?).

I'm not an expert on this, so not sure if my terminology is off a bit.

In the midi setup on the Nerdseq, I have Host Channel 2-9 (Linnstrument 2-9 are the Per Note Channels) all set up to send to the same track.

I can play the Disting polyphonically, but bending any note also bends every other note. I'm not certain if this is because the Nerdseq track itself kinda "smooshes" the forwarded channels together in order to forward the 8 incoming channels to the 4 outgoing.

Anybody have any ideas on how I could set this up?

 I can do an actual midi cable straight from the Linn to the Disting, but then I lose all that Nerdseq goodness.]]> https://forum.xor.eu/showthread.php?tid=2087 Mon, 06 Apr 2026 09:59:36 +0200 heyitsme]]> https://forum.xor.eu/showthread.php?tid=2087 https://forum.xor.eu/showthread.php?tid=2086 Tue, 31 Mar 2026 13:22:15 +0200 ohho]]> https://forum.xor.eu/showthread.php?tid=2086
I have microcosm hologram pedal I'd like to control through nerdseq.

The signal flow of my midi atm is: nerd out> microcosm in > ableton in, ableton out> microcosm out> nerd in.
I know that is correcrt because ableton does recieve midi messages properly and I've used this for a while in this configuration.

I'd like to control the microcosm pedal cc values with the nerdseq mapping.
However, I'm unsure what to use for the midi out settings on the mapping? 
Microcosm midi channel is 8

Thanks]]>
I have microcosm hologram pedal I'd like to control through nerdseq.

The signal flow of my midi atm is: nerd out> microcosm in > ableton in, ableton out> microcosm out> nerd in.
I know that is correcrt because ableton does recieve midi messages properly and I've used this for a while in this configuration.

I'd like to control the microcosm pedal cc values with the nerdseq mapping.
However, I'm unsure what to use for the midi out settings on the mapping? 
Microcosm midi channel is 8

Thanks]]> https://forum.xor.eu/showthread.php?tid=2084 Fri, 20 Mar 2026 17:18:43 +0100 heyitsme]]> https://forum.xor.eu/showthread.php?tid=2084
However, when I try to assign a specific note to a Pad, it doesn’t trigger the pad. When I change that specific pad to listen to MIDI In channel 10, all notes that are played trigger that pad, I’ve also tried setting the Root Note to be the same as the Pad Note but that doesn’t help either. What am I missing here?

I want to assign a specific note to a specific pad as my plan is to get a second BitBox micro, in order to have more samples available from the same MIDI track. 

More specifically, here is my setup:

NerdSeq1 + 2hp MIDI connected to NerdSeq2 + 2hp MID

NerdSeq1 connected to the Bitbox Micro1 MIDI In. 

This already consumes both MIDI outs on the NerdSeq 1, so the plan is to use the MIDI through on NerdSeq2’s 2HP MIDI expander and connect it to the Bitbox Micro2, but I want to make sure that assigning MIDI notes to pads does work and that this setup using the MIDI through on the second NerdSeq to the second Bitbox Micro will work before pulling the trigger. 

What am I missing not being able to assign specific note values to specific pads? Also, would appreciate some pointers about the setup with MIDI through, will it work?


  Screenshot 2026-03-20 at 17.23.29.png (Size: 417,53 KB / Downloads: 81)
  Screenshot 2026-03-20 at 17.23.54.png (Size: 355 KB / Downloads: 81)
  Screenshot 2026-03-20 at 17.24.06.png (Size: 179,26 KB / Downloads: 79) ]]>
However, when I try to assign a specific note to a Pad, it doesn’t trigger the pad. When I change that specific pad to listen to MIDI In channel 10, all notes that are played trigger that pad, I’ve also tried setting the Root Note to be the same as the Pad Note but that doesn’t help either. What am I missing here?

I want to assign a specific note to a specific pad as my plan is to get a second BitBox micro, in order to have more samples available from the same MIDI track. 

More specifically, here is my setup:

NerdSeq1 + 2hp MIDI connected to NerdSeq2 + 2hp MID

NerdSeq1 connected to the Bitbox Micro1 MIDI In. 

This already consumes both MIDI outs on the NerdSeq 1, so the plan is to use the MIDI through on NerdSeq2’s 2HP MIDI expander and connect it to the Bitbox Micro2, but I want to make sure that assigning MIDI notes to pads does work and that this setup using the MIDI through on the second NerdSeq to the second Bitbox Micro will work before pulling the trigger. 

What am I missing not being able to assign specific note values to specific pads? Also, would appreciate some pointers about the setup with MIDI through, will it work?


  Screenshot 2026-03-20 at 17.23.29.png (Size: 417,53 KB / Downloads: 81)
  Screenshot 2026-03-20 at 17.23.54.png (Size: 355 KB / Downloads: 81)
  Screenshot 2026-03-20 at 17.24.06.png (Size: 179,26 KB / Downloads: 79) ]]> https://forum.xor.eu/showthread.php?tid=2082 Wed, 18 Mar 2026 23:19:27 +0100 m.roach]]> https://forum.xor.eu/showthread.php?tid=2082
However, when I insert row probability on the lfo row the break command does not consistently work and the lfo stays on then cuts off. I have tried putting the lfo on 01 instead of 00 so the break doesn’t send to the same row but the same thing happens. When I reset with no probability it works as it should. 

I’m certain I’m missing some fundamental point here …

Thanks in advance.]]>
However, when I insert row probability on the lfo row the break command does not consistently work and the lfo stays on then cuts off. I have tried putting the lfo on 01 instead of 00 so the break doesn’t send to the same row but the same thing happens. When I reset with no probability it works as it should. 

I’m certain I’m missing some fundamental point here …

Thanks in advance.]]> https://forum.xor.eu/showthread.php?tid=2081 Mon, 16 Mar 2026 17:51:24 +0100 Lunatic]]> https://forum.xor.eu/showthread.php?tid=2081
Certainly a dumb question and sorry for that, 

but in manual, I don’t find the shortcut for just shift pattern up or down , just find in manual a way to insert or delete some content which shift pattern.

I use this feature a lot in other sequencer]]>
Certainly a dumb question and sorry for that, 

but in manual, I don’t find the shortcut for just shift pattern up or down , just find in manual a way to insert or delete some content which shift pattern.

I use this feature a lot in other sequencer]]> https://forum.xor.eu/showthread.php?tid=2080 Fri, 13 Mar 2026 22:12:18 +0100 TwistedGenetics]]> https://forum.xor.eu/showthread.php?tid=2080
I cant get any of my Lauchpads to work with the Nerdseq. I have enabled it in the setting and tried both devices I have, connecting in both the device and host connection, and also tried multiple cables. Neither Launchpad lights up when plugged in. I have Launchpad pro and first Gen mini. Can anyone give me some guidance?

Thanks 
Jamie]]>
I cant get any of my Lauchpads to work with the Nerdseq. I have enabled it in the setting and tried both devices I have, connecting in both the device and host connection, and also tried multiple cables. Neither Launchpad lights up when plugged in. I have Launchpad pro and first Gen mini. Can anyone give me some guidance?

Thanks 
Jamie]]> https://forum.xor.eu/showthread.php?tid=2079 Thu, 12 Mar 2026 02:18:33 +0100 rubberband]]> https://forum.xor.eu/showthread.php?tid=2079 https://forum.xor.eu/showthread.php?tid=2078 Tue, 10 Mar 2026 20:22:51 +0100 particledots]]> https://forum.xor.eu/showthread.php?tid=2078 I am brand new to NERDSEQ and eager to begin exploring
I purchased my module from reverb and it will be arriving in the next few days
I would have loved to have got one with a black panel but the deal on the one I got with a silver panel was too good to pass on
I have been trouble finding anywhere that sells the panels in the USA?  Are they available from any stores over here?]]> I am brand new to NERDSEQ and eager to begin exploring
I purchased my module from reverb and it will be arriving in the next few days
I would have loved to have got one with a black panel but the deal on the one I got with a silver panel was too good to pass on
I have been trouble finding anywhere that sells the panels in the USA?  Are they available from any stores over here?]]> https://forum.xor.eu/showthread.php?tid=2074 Mon, 23 Feb 2026 10:40:34 +0100 baikul]]> https://forum.xor.eu/showthread.php?tid=2074 Is that possible?]]> Is that possible?]]> https://forum.xor.eu/showthread.php?tid=2073 Fri, 20 Feb 2026 20:04:35 +0100 rubberband]]> https://forum.xor.eu/showthread.php?tid=2073
Is there a way to configure one of the TRS ports on the Multi-IO to act as MIDI thru?  My use case is that I'd like to use the NerdSeq as a MIDI class compliant interface to send SYSEX configuration files from my computer to other modules.  I'd connect my my computer to the NerdSeq via USB, use Sysex Librarian to send the file, and have the NerdSeq just pass it along over a MIDI Thru port to my device.

This is to save me having to buy a dedicated MIDI interface for the computer that I'll probably use once every year.

Thanks!]]>
Is there a way to configure one of the TRS ports on the Multi-IO to act as MIDI thru?  My use case is that I'd like to use the NerdSeq as a MIDI class compliant interface to send SYSEX configuration files from my computer to other modules.  I'd connect my my computer to the NerdSeq via USB, use Sysex Librarian to send the file, and have the NerdSeq just pass it along over a MIDI Thru port to my device.

This is to save me having to buy a dedicated MIDI interface for the computer that I'll probably use once every year.

Thanks!]]> https://forum.xor.eu/showthread.php?tid=2072 Thu, 19 Feb 2026 19:23:34 +0100 kriskeyman]]> https://forum.xor.eu/showthread.php?tid=2072
Also tried in Mappings, but seemed to have no effect. MIDI TRK Note > Shader Mod1 I think.

I’d like to be able to have all 4 lanes in a MIDI track modify shaders. Is this possible?]]>
Also tried in Mappings, but seemed to have no effect. MIDI TRK Note > Shader Mod1 I think.

I’d like to be able to have all 4 lanes in a MIDI track modify shaders. Is this possible?]]> https://forum.xor.eu/showthread.php?tid=2060 Sat, 31 Jan 2026 14:25:20 +0100 48484B]]> https://forum.xor.eu/showthread.php?tid=2060 Is it possible to record CV for every step without inputting a gate at the time where it should be recorded?
For me, every step 1 value recorded would be OK in. In case there is no cv change, no value is needed.

My idea is to use CV out of CV16 to automate VCAs and other parameters by live recording this using a slider with cv out into the live input CV 1. Is this possible without gates to another input (e.g. CV input 2)? 
Or is the idea to set up a trigger (e.g. clock) to fire recording, as if the CV values were for single “notes”?
(E.g. feeding the clock into CV2 to get the triggers on every step while recording?)

Recording the step edit using a gate I got to work, but not the continuous live recording on CV16, i have to move with the cursor to select the value and put a gate on to record this step.

Is there maybe a workaround with mapping? Or am I doing something wrong?

I know I can use slew to get smoothing of the value changes, which is nice!]]> Is it possible to record CV for every step without inputting a gate at the time where it should be recorded?
For me, every step 1 value recorded would be OK in. In case there is no cv change, no value is needed.

My idea is to use CV out of CV16 to automate VCAs and other parameters by live recording this using a slider with cv out into the live input CV 1. Is this possible without gates to another input (e.g. CV input 2)? 
Or is the idea to set up a trigger (e.g. clock) to fire recording, as if the CV values were for single “notes”?
(E.g. feeding the clock into CV2 to get the triggers on every step while recording?)

Recording the step edit using a gate I got to work, but not the continuous live recording on CV16, i have to move with the cursor to select the value and put a gate on to record this step.

Is there maybe a workaround with mapping? Or am I doing something wrong?

I know I can use slew to get smoothing of the value changes, which is nice!]]>