Mapping Skripts Sharing

[XORadmin]

Great idea, but I'd just like a simple starter course (maybe in the manual) on how to use the mapping matrix. It looks really interesting, but without a few more explanations in the manual I'm not sure where to start or what to try - something simple, like sending the trigger from trk #1 to the mod out of track #2, could be a good place to start?

Probably a bit too simple, but at least that way one starts to understand how the whole thing works.

They are simple examples in the manual with a description (page 145, 146..). Also every line in the bouncing ball and turing machine expample is explained. If you understand these lines which are simple on their own, then you can build something up with that.

Your 'start' is slightly more complex as a trigger does generate 0 (off) or 1 (on) and not a Modulation Pitch.
You would need to process the trigger value of 0 to 1 so it creates a usable MOD pitch.
This could be an option:

Code:

00 TRIG  TR1          >                   gets the trigger/gate state of TR1)
01 CALC  PASS  00 VA  > CV PTCH  MOD1     passes 0 or the value of variable A if row 00 (the trigger) is 0 or 1
Variable A must be filled with a value like for example 800/2048 to generate then 0 or 5 volt (if the offset switch is to the right)

They are plenty other possibilities and some that don't need to involve a variable.