03-11-2022, 08:20 AM
Cleaned it a bit up.
So, it is a Launchpad Pro MK3. Using the Midi ports on it with the TRS-DIN adapters of the launchpad is correct.
On the NerdSEQ side the only settings you got to do are:
Project Screen -> Input / Record Setup -> Midi Data input ON
Midi Channel 1 -> Launchpad PRO
On the Launchpad you need to use the programmer mode:
As i know from the regular Launchpad Pro, for these ones the local midi ports needed to be enabled, but I don't know if this is also necessary for the MK3 version. If it doesn't work yet then this is probably worth to find out in the LP manual. The original PRO only worked on Midi Channel 1, so that might also apply for the PRO MK3.
So, it is a Launchpad Pro MK3. Using the Midi ports on it with the TRS-DIN adapters of the launchpad is correct.
On the NerdSEQ side the only settings you got to do are:
Project Screen -> Input / Record Setup -> Midi Data input ON
Midi Channel 1 -> Launchpad PRO
On the Launchpad you need to use the programmer mode:
Quote:(from the manual: To switch between Live Mode and Programmer Mode, first enter the setup menu by holding Setup.
Press the green Scene Launch button to enter Live Mode, or the orange Scene Launch button to
enter Programmer Mode (see image on p.19). The Mode will not be entered until the Setup button is
released.
Launchpad Pro will always power on into Live Mode.
As i know from the regular Launchpad Pro, for these ones the local midi ports needed to be enabled, but I don't know if this is also necessary for the MK3 version. If it doesn't work yet then this is probably worth to find out in the LP manual. The original PRO only worked on Midi Channel 1, so that might also apply for the PRO MK3.
PLEASE use the search function if something have been asked or discussed before.
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!
Every (unnessesary) forum support means less time to develop! But of course, i am here to help!