Hello 
,
I am asking you for advice and help with configuring my setup.
I will try to summarize the problem, do not hesitate to ask me for details.
Context:
Before I could not leave my synth for more than a day with a patch due to lack of space. I am now lucky enough to have a small home studio. So I am looking to have a "ready to use" setup to make it easier to compose quickly, and spend less time plugging and unplugging instruments.
Goal : I want the Nerdseq to be the brain of the setup. Currently I send a signal via midi out to a Kenton MIDI Thru 5 (MIDI multiplier).
The RC-505mk2 and the TR8S are well synchronized with the nerdseq.
I have 3 uDCO oscillators from soundforce (https://sound-force.nl/?page_id=4534), which I want to use in MIDI to avoid having to tune them each time.
Until now I used them in CV. I want to be able to link oscillators 1,2 and 3 using the midi channel 1,2 and 3 of the keystep 37 keyboard. And that in the nerdseq my patterns are recorded in tracks 1 2 and 3 as well. Not polyphonically or instantly.
Here is a image :
![[Image: 17335331753367109019.jpg]](http://www.image-heberg.fr/files/17335331753367109019.jpg)
On the uDCOs, I set the midi only mode and I have buttons to select the right channel.
But I think my nerdseq configuration is actually not good.
Problems:
1) When my track is in cv, the nerdseq receives the signals well, I can play and record on the fly.
But to use the uDCOs I suppose I have to use tracks configured in MIDI.
But when I create a midi track, I see that the USB host and Midi out LEDs are flashing but the notes are not displayed in the nerdseq, I can neither play nor record. Do you have any ideas?
Here is how I configured the MIDI IC2 setup during my tests:
![[Image: 1733523864175534705.jpg]](http://www.image-heberg.fr/files/1733523864175534705.jpg)
Here for example is a note (A4) that I can play without problem when my track is configured in CV, but which will no longer appear at this location when I switch to MIDI track
![[Image: 17335238923763985056.jpg]](http://www.image-heberg.fr/files/17335238923763985056.jpg)
2) Finally there is another point: The jack ->5 Din adapter that I use between the nerdseq midi out and my MIDI multiplier is wired in TRS B, when I use the TRS A, the clock does not arrive correctly to the roland equipment. Should I use the same adapters for each oscillator?
Thanks for your help,
, I am asking you for advice and help with configuring my setup.
I will try to summarize the problem, do not hesitate to ask me for details.
Context:
Before I could not leave my synth for more than a day with a patch due to lack of space. I am now lucky enough to have a small home studio. So I am looking to have a "ready to use" setup to make it easier to compose quickly, and spend less time plugging and unplugging instruments.
- Roland RC 505 Mk2 looper for guitar and bass
- Roland TR8S
- keystep 32
- Kenton MIDI Thru 5 (https://www.thomann.de/fr/kenton_midi_thru_5.htm)
Goal : I want the Nerdseq to be the brain of the setup. Currently I send a signal via midi out to a Kenton MIDI Thru 5 (MIDI multiplier).
The RC-505mk2 and the TR8S are well synchronized with the nerdseq.
I have 3 uDCO oscillators from soundforce (https://sound-force.nl/?page_id=4534), which I want to use in MIDI to avoid having to tune them each time.
Until now I used them in CV. I want to be able to link oscillators 1,2 and 3 using the midi channel 1,2 and 3 of the keystep 37 keyboard. And that in the nerdseq my patterns are recorded in tracks 1 2 and 3 as well. Not polyphonically or instantly.
Here is a image
: On the uDCOs, I set the midi only mode and I have buttons to select the right channel.
But I think my nerdseq configuration is actually not good.
Problems:
1) When my track is in cv, the nerdseq receives the signals well, I can play and record on the fly.
But to use the uDCOs I suppose I have to use tracks configured in MIDI.
But when I create a midi track, I see that the USB host and Midi out LEDs are flashing but the notes are not displayed in the nerdseq, I can neither play nor record. Do you have any ideas?
Here is how I configured the MIDI IC2 setup during my tests:
Here for example is a note (A4) that I can play without problem when my track is configured in CV, but which will no longer appear at this location when I switch to MIDI track
2) Finally there is another point: The jack ->5 Din adapter that I use between the nerdseq midi out and my MIDI multiplier is wired in TRS B, when I use the TRS A, the clock does not arrive correctly to the roland equipment. Should I use the same adapters for each oscillator?
Thanks for your help,