Change Track Clock

[XORadmin]

Yes but that is the correct functionality. Clock changes are queued to allow a synchronized change.
You need to use the clock change command in direct mode for it to be changed immediately. ( Possibly needed from an FX but I don't know exactly out of my head rght now)

-> From the manual:
CBPB → Combined Playback FX
This is a multifunction FX to change the clock settings, playback order,
transpositions and to execute live jumps between patterns.
The first digit defines the functions:
0XX Change the clock type after the end of the current playing pattern. The new
pattern will play with the new clock setting.
Here you can set the different dividers and multipliers for the current track. Possible
settings are from 000 to 010:
/7, /6, /5, /3, /32, /16, /8, /4, /2, Normal clock, *2, *4, *8, *3, *5, *6, *7
This order is chosen on purpose as mostly base2 dividers and multipliers are used
around the regular clock. (See track setup)
The first digit got an additional function to either let the new clock change with a new
pattern (after the end of the current playing pattern) or to force to the new clock
setting directly.
1XX Same as 0XX but it changes the clock immediately. Use this with caution as
this might cause a un-synchronized pattern if being called somewhere in the middle
of a pattern.
If it’s being called from the first step, the new clock setting will run properly
synchronized within this pattern. (Depending on if the last pattern was synchronized)